Export Airfoil Coordinates in Eppler Format
Eppler format Airfoil coordinate data can be exported using this facility. Only one airfoil at a time may be exported. Each airfoil export is saved as an individual file.
To export;
1. Select click on the Eppler Coordinates radio button.
2. Select an airfoil from the dropdown list.
3. Click on the Ok button.
The format of the data is as follows;
Coordinates start at the trailing edge on the upper surface of the airfoil, continuing around the leading edge and back to the trailing edge along the lower surface.
A sample is shown below;
1.00000 0.00000
0.99572 0.00115
0.98296 0.00448
0.96194 0.00972
0.93301 0.01656
0.89668 0.02475
0.85355 0.03400
0.80438 0.04394
0.75000 0.05412
0.69134 0.06405
0.62941 0.07319
Each line represents an x and y coordinate.
The file name will default to the first 8 characters of the airfoil name followed by the extension cor.
eg;
You are provided with the option to change this.
naca2302.cor