Issues

Various Rib and Spar Issues

Wed, 24 Feb 2021 06:41:33 GMT

Rib thickness not saved in Rib Spacing and distribution screen - Fixed V3.0.52
TE Thickness, when set to fixed, is not working - Fixed V3.0.52
Airfoil Thickness in PDF does not match DXF files - Fixed V3.0.52
Straight spar support - Not Fixed will be fixed in next release
3d Wing view not correct - Not Fixed will be fixed in next release

Airfoil Cad and Design Cad Toolbars disappear sometimes

Tue, 23 Feb 2021 20:02:55 GMT

Both toolbars sometimes disappear and can cause Winfoil to crash.

Fixes have been made to the Airfoil Cad toolbar in V3.0.53.
Camber and thickness changes were not being applied immediately which could affect the stability of Winfoil.

Dimension Defaults in Preferences Screen Not Working

Thu, 15 Oct 2020 07:31:44 GMT

The dimensions on the Printing tab in the Preferences screen are used for calbrating the printer and for setting a correction factor.
The new Dimension Defaults (Inches or Millimetres) added to the Other tab in the Preferences screen are now used as the default length units for printing and creating designs.

Wing Plan View For Fixed Chord Spars

Thu, 15 Oct 2020 07:19:17 GMT

Fixed issue with Wing Plan view in Design Cad and Print Preview screens where spars are set to fixed chord position.
Spars were not following set spar position in relation to the root rib.

Print Orientation Not Retained

Wed, 14 Oct 2020 20:22:25 GMT

Print orientation was not being retained after selection in Print Setup.
This has been corrected so that the selected orientation will be saved.

Add Show Password Button to Logon and Change Password Screens on Web Site

Sun, 08 Mar 2020 12:15:35 GMT

Added button to assist when verifying complex password. Assist new portal users first time they logon or change their password

Design Specification Preview Not Working

Wed, 19 Feb 2020 19:53:40 GMT

When viewing a Design Specification in print preview nothing is displayed.

Fixed in V3.0.49

Coordinate Files Not Importing

Wed, 19 Feb 2020 19:35:28 GMT

Cor and Dat files not displaying after importing.

Found issue with validating import files.
If user selected import from directory then the first invalid file that was detected caused the import process to end.
Additional validation has been added and if an error occurs a message is displayed and the process continues.

Lost Password Link Not Working

Wed, 19 Feb 2020 10:50:45 GMT

Password link not working in Winfoil web site.
If log on retry attempts had been exceeded then the password reset was working but the user was prevented from logging in.
This has been fixed.